Specification

VX-2000 System Manager

Power Source

24 V DC (operating range: 20 - 40 V DC)
M3.5 screw terminal, distance between barriers: 8.8 mm

Current Consumption

Under 650 mA (20 V DC)

Input

-20 dB*, unbalanced, Number of module slots:8
Usable module: VX-200XR, VX-200XI, 900 series plug-in modules (M-01F, M-01M, M-01P,
M-01S, M-01T, M-03P, M-51F, M-51S, M-51T, M-61F, M-61S, M-61T,
U-01F, U-01P, U-01R, U-01S, U-01T, U-03R, U-03S, U-61S, U-61T)

Audio Link Output

Number of audio buses: 4
0 dB*, electronically balanced, RJ45 female connector
Twisted-pair straight cable (TIA/EIA-568A standard)

Monitor Output

0 dB*, electronically balanced, XLR receptacle (3 pins)

Frequency Response

20 Hz - 20 kHz

S/N Ratio

Over 60 dB

Distortion

Under 0.5 %

Cross Talk

Under -60 dB (1 kHz, 0 dB*)

Control Input

16 inputs, no-voltage make contact, open voltage: 17 V DC,
short circuit current: Under 5 mA, RJ45 connector 2

Control Output

16 outputs, open collector output, withstand voltage: 30 V DC,
control current: Under 5 mA, RJ45 connector 2

Chime Tone

Built-in chime: 4-tone chime (up)/4-tone chime (down)/2-tone chime/Gong

Communication System

PC (Setting software to be installed): D-sub connector (9 pins), cross cable, RS-232C
VX-2000SF: RJ45 female connector, Twisted-pair straight cable (TIA/EIA-568A standard),
LONWORKS RS-485

Operating Temperature

0 ℃to +40 ℃

Finish

Panel: Surface-treated steel plate, black, 30 % gloss, paint

Dimensions

482 (W) 132.6 (H) 337 (D) mm

Weight

6.4 kg

Accessory

Rack mounting bracket (preinstalled on the unit) x 2, Rack mounting screw x 4,
Fiber washer x 4, Blank panel x 7, Blank panel mounting screw x 14,
Setting software installation CD x 1, Fuse (T1.6 A L) x 1, Fuse (T6.3 A L) x 1

Option

Voice announcement board: EV-200M, Isolation transformer: IT-450 (audio link output)

Specification

VX-2000SF (Surveillance Frame)

Power Source

24 V DC (operating range: 20 - 40 V DC)
M3.5 screw terminal, distance between barriers: 8.8 mm

Current Consumption

Under 2 A (40 V DC)

Number of Module Slot

10, usable modules: VX-200SZ, VX-200SP, VX-200SI, VX-200SO

Frequency Response

20 - 20,000 Hz

Signal to Noise Ratio

Over 60 dB

Distortion

Under 0.5%

Cross Talk

Under -60 dB (1 kHz, 0 dB*)

Audio Link Input/Output

Number of audio busses: 4
0 dB*, electronically balanced, RJ45 female connector
Twisted-pair straight cable (TIA/EIA-586A standard)

Standby Amplifier Link

RJ45 female connector for connecting the VP-2064, VP-2122, VP-2241,
VP-2421 Power Amplifier.
Twisted-pair straight cable (TIA/EIA-586A standard)

Communication System

VX-2000, VX-2000SF: RJ45 female connector 2, LONWORKS RS-485
VX-2000DS: RJ45 female connector 2,
Twisted-pair straight cable (TIA/EIA-586A standard)

Operating Temperature

0℃to +40℃

Finish

Panel: Surface-treated steel plate, black, 30% gloss, paint

Dimensions

482 (W) 132.6 (H) 337 (D) mm

Weight

5.6 kg

Accessory

Rack mounting screw x 4, Fiber washer x 4, Blank panel x 9,
Rack mounting bracket (preinstalled on the unit) x 2,
Standby amp. cable (3 m) x 1, Blank panel mounting screw x 18

Option

Isolation transformer: IT-450 (audio link output)

Specification

RM-200XF (Fireman's Microphone)

RM-200X (Remote Microphone)

RM-210 (Remote Microphone Extension)

Power Source

24 V DC (operating range: 16 - 40 V DC)

24 V DC (operating range: 16 - 40 V DC), supplied from RJ45 connector
or power input jack (non-polarity type)
Usable power input plug: 5.5 mm outer diameter, 2.1 mm inner diameter,
and 9.5 mm long.

-

Current Consumption

200 mA or less (RM-200XF), 850 mA (with 10 RM-210s connected)

Under 200 mA (RM-200X), 750 mA (with 9 RM-210s connected)

20 mA max. (in terms of RM-200M's DC power input)
75 mA max. (in terms of DC power inputs of RM-200X and RM-200XF)
80 mA max. (in terms of DC power inputs of RM-200SA and RM-200SF)

Audio Output

0 dB*, 600 Ω, balanced

0 dB*, 600 Ω, balanced, RJ45 connector

-

Hand-Held Microphone

Dynamic microphone, Function switch (default: Press-to-talk),
Microphone element fault detection

-

-

Gooseneck Microphone

-

Unidirectional electret condenser microphone

-

Distortion

1 % or less

Under 1%

-

External Microphone Input

-

-40 dB*, 2.2 kΩ, unbalanced, mini jack, phantom powering

-

Frequency Response

200 Hz - 15 kHz

100 - 20,000 Hz

-

S/N Ratio

55 dB or more

Over 60 dB

-

Internal Monitor Speaker

200 mW

-

Volume Control

Microphone volume control, Monitor speaker volume control

-

Number of Function Keys

5 (including Hand-held microphone's switch),
extendable up to 105 (with 10 RM-210s connected)

15, extendable up to 105 (with 9 RM-210s connected)

10

Key Extension

10 keys extension per RM-210, EXTENSION connector

10 keys extension per RM-210, EXTENSION connector

-

Number of Connectable Units

4

8 (include RM-200XF)

-

Communication System

LONWORKS Twisted Pair Free Topology Transceiver

LONWORKS Twisted Pair Free Topology Transceiver

-

Connection Cable and Connector

Category 5 STP cable, plug-in screw connector

Category 5 STP cable, RJ45 connector

-

Communication Distance

500 m (Free topology wiring)

-

Finish

ABS resin, blueish gray (PANTONE 538 or its equivalent)

Dimensions

200 (W) 215 (H) 82.5 (D) mm (excluding the coiled cord)

190 (W) 76.5 (H) 215 (D) mm (gooseneck microphone excluded)

110 (W) 76.5 (H) 215 (D) mm

Weight

1.2 kg

850 g

350 g

Accessory

Plug-in screw terminal x 1, Wall mounting bracket x 1, Wall mounting screw x 2,
Box mounting screw x 2

-

Extension cable x 1, Linkage bracket A x 2, Linkage bracket B x 1,Screw for linkage bracket x 12

Applicable Box

YS-11A

-

-

Connection

-

-

Connection by way of dedicated cable

Applicable Unit (option)

-

-

RM-200M, RM-200SA, RM-200SF, RM-200X, RM-200XF

Specification

VX-2000XI Audio Input Module With Control Input

VX-200XR Remote Microphone Input Module

Power Source

Supplied from VX-2000

Supplied from VX-2000

Current Consumption

Under 30 mA

Under 17 mA

Input Sensitivity

(Rated Output -20 dB)

MIC: -70 to -42.5 dB* (adjustable)
LINE: -20 to +7.5 dB* (adjustable)
MIC or LINE selectable by the built-in switch

-

Connectable Remote Microphone

-

RM-200X and RM-200XF

Low Cut Filter (100 Hz)

9 to 15 dB attenuation (adjustable)

-

High Cut Filter (10 kHz)

8 to 14 dB attenuation (adjustable)

-

Distortion

Under 0.5%

-

Frequency Response

50 - 20,000 Hz

-

Phantom Power

15 V (open), 6 V (current consumption: 3.3 mA)

-

Control Input

No-voltage make contact, open voltage: 17 V DC,
short-circuit current: Under 5 mA

-

Input Connector

RJ45 female connector
Twisted-pair straight cable (TIA/EIA-568A standard)

RJ45 female connector
Twisted-pair straight cable (TIA/EIA-568A standard)

Finish

Panel: Aluminum, hairline

Panel: Aluminum, hairline

Dimensions

35 (W) 78 (H) 88 (D) mm

35 (W) 78 (H) 88 (D) mm

Weight

70 g

70 g

Accessory

Mounting screw x 2

Mounting screw x 2

Option

Isolation transformer: IT-450

-

Applicable Model

VX-2000

VX-2000

Specification

Power Amplifier

VP-2064

(60W x4)

VP-2122

(120W x 2)

VP-2241

(240W)

VP-2421

(420W)

Power Source

28 V DC (operating range: 20 - 40 V DC)
M4 screw terminal, distance between barriers: 12 mm

Current Consumption

4.8 A in total (EN60065)

4.8 A (EN60065)

7.6 A (EN60065)

Rated Output Power

60 W 4 (at min. resistive and max. capasitive load)

120 W 2 (at min. resistive and max. capasitive load)

240 W (at min. resistive and max. capasitive load)

420 W (at min. resistive and max. capasitive load)

Output Power (at AC Mains: 195.5 V)

45 W 4 (at min. resistive and max. capasitive load)

90 W 2 (at min. resistive and max. capasitive load)

180 W (at min. resistive and max. capasitive load)

320 W (at min. resistive and max. capasitive load)

Output Voltage

100 V (70 V, 50 V: selectable by internal wiring change)

Minimum Resistive Load

167 Ω (at 100 V), 83 Ω (at 70 V), 41 Ω (at 50 V)

83 Ω (at 100 V), 41 Ω (at 70 V), 21 Ω (at 50 V)

41 Ω (at 100 V), 21 Ω (at 70 V), 10 Ω (at 50 V)

24 Ω (at 100 V), 12 Ω (at 70 V), 6 Ω (at 50 V)

Maximum Capacitive Load

0.125 μF (at 100 V), 0.25 μF (at 70 V), 0.5 μF (at 50 V)

0.25 μF (at 100 V), 0.5 μF (at 70 V), 1 μF (at 50 V)

0.5 μF (at 100 V), 1 μF (at 70 V), 1 μF (at 50 V)

Number of Channels

4

2

1

Input

Specified by input module VP-200VX

Number of Module Slots

4, usable module: VP-200VX

2, usable module: VP-200VX

1, usable module: VP-200VX

Output

Power amplifier output (speaker line):
M3.5 screw terminal, distance between barriers: 8.8 mm

Frequency Response

40 Hz - 16 kHz, 3 dB (at 1/3 rated output)

Distortion

1 % or less (at rated output, 1 kHz)

S/N Ratio

80 dB or more

Panel Indicator

Channel power indicator: 4 channels, dual colour LED
Overheat indicator: Yellow LED

Channel power indicator: 2 channels, dual colour LED
Overheat indicator: Yellow LED

Channel power indicator: 1 channels, dual colour LED
Overheat indicator: Yellow LED

Operating Temperature

0 ℃to +40 ℃

Finish

Panel: Surface-treated steel plate, black, 30 % gloss, paint

Dimensions

482 (W) 88.4 (H) 340.5 (D) mm

Weight

11.2 kg

9.1 kg

8.1 kg

9.5 kg

Accessory

Rack mounting screw x 4, Fiber washer x 4

VX-2000DS (301H version) Emergency Power Supply

Power Source

230 V AC, 50/60 Hz

Power Consumption

240 W max.

Applicable Battery

Panasonic LC-X1265PG/APG (65 Ah)

Charging Method

Trickle charging

Charging Current

5 A max.

Charging Output Voltage

27.3 V 0.3 V (at 25 ℃(77 ゜F))
Temperature correction coefficient: -40 mV/℃

Power Supply Input

6 M4 screw terminal, distance between barriers: 11 mm (0.43")

DC Power Output

6 (25 A max. each) M4 screw terminal, distance between barriers: 11 mm (0.43")

Control Connector

RJ45 female connector for connecting the VX-2000SF Surveillance Frame.
Twisted-pair straight cable (TIA/EIA-568A standard)
Type of control signal: Battery check, AC power status, DC power status,
charging circuit failure, and battery failure

Battery Connection

1 pair of positive and negative terminals
Applicable cable diameter: AWG 6 - AWG 1/0 (Line resistance within 4 mΩ/total)

Operating Temperature

0 ℃to +40 ℃(32 ゜F to 104 ゜F)

Finish

Panel: Surface-treated steel plate, black, 30 % gloss, paint

Dimensions

482 (W) 88.4 (H) 377.6 (D) mm (18.98" 3.48" 14.87")

Weight

10.5 kg (23.15 lb)

Accessory

Rack mounting screw x 4, Fiber washer x 4, Blade fuse (40 A) x 3,
Fuse (T3.15 A L) x 1, Power cord (2 m (1.65 ft)) x 1, Insulating sheet x 1,
Attention label (German) x 1, Fastener hook x 4, Fastener loop x 4
Sticker (Declaration of compliance) x 1

Fuse Rating

Blade fuse (40 A), Blade fuse (7.5 A), Fuse (T3.15 A)

Internal Resistance

Maximum internal resistance of the battery and its associated circuitry,
Ri max: 50 mΩ

Current Specification

Maximum output current draw from the battery: 43.5 A
Rated maximum continuous output current, I max a: 43.5 A
Rated maximum short duration output current, I max b: 43.5 A
Rated minimum output current, I min: 0 A

Cable Specification

Recommended cable parameter for DS-SF Link:
Twisted-pair straight cable (TIA/EIA-568A standard)